|
|
Optimalization of Induction Furnace Operation in foundry Vsetín
Trachta, Jiří ; Nowak, Stanislav (referee) ; Lázničková, Ilona (advisor)
The aim of this work is optimalisation of induction furnace in foundry for company PROMET FOUNDRY a.s. The company has two induction furnances. There are installed as identical construction. They have 2 modes of operation. First mode is founding and second mode is mode, where is temperature in maintain mode. Only one induction furnance can work in the founding mode at a time though. Inducion furnances are in the single-phase connection and they cause unbalance in the distribution network. Near the foundry there is a small network area whitch it is operated by company Zásobování teplem Vsetín a.s. The consumption of electrical energy in foundry so big, that in the year 2009 was made elaborate for Zásobování teplem Vsetín a.s. It was write at Laboratoře diagnostiky výkonů (Laboratory of performance diagnostics), which is a part of Electrotechnic Department at Technical Univarsity of Ostrava. The ordered study was named “Verification of causes of increased reactive energy consumption during transition from electricity delivery to electricity consumption”. The conclusion of this assignment confirms that in distribution network in the Jiráskova area in Vsetín there is unbalance of electrical energy and there is high part of reactive power. The next conclusion is crucial to find the customer who made the unbalance and to set relevant remedy. The last step will be the identification whether such device can actually be effectively balanced. It was subsequently proved that the Promet Foundry was causing the unbalance and that balanced consumption would be reasonable. Promet Foundry thus addressed Autel a.s. company with an inquiry to make a study of removing the causes of the unbalance which is caused by current induction furnaces operation at a minimum possible cost, least possible influence on the performance and minimum construction changes concerning the building. In this thesis there will be some topics. The result of which will be introducing of used heating technology, introducing of company and of effective plant performance and subsequent suggestions of possible unbalance removal or reactive power decrease. Several ways which are being implemented in the industry in order to balance consumption will be described. A suitable balancing plant will be subsequently chosen and its parameters will be calculated.
|
|
|
Conceptual design of competition model airplane
Pospíšil, Jakub ; Vaněk, František (referee) ; Hájek, Tomáš (advisor)
This bachelor thesis deals with the conceptual design of a competition model of an aircraft for an international student competition. The introduction deals with the rules of the competition and their subsequent analysis. The research part deals with a possible concept of the aircraft from the point of view of various configurations of individual parts of the model. In the practical part, the characteristics of individual parts of the aircraft are processed and a mass analysis is performed.
|
|
|
Towards Parameterized Contract Validator in ANaConDA Framework
Mužikovská, Monika ; Fiedor, Tomáš (referee) ; Smrčka, Aleš (advisor)
This work deals with problematics of contracts for parallelism. It is a technique allowing to specify requirements for atomicity in parallel programs and to create automatic tools for detection of atomicity violation. ANaConDA framework provides dynamic analyser called Contract-validator which can detect contract violations in parallel programs. However, due to analysis without context, it can produce a lot of warnings about contract violation that are not considered as errors. The aim of this work was to design and implement a method supporting contracts extended with parameters and their constraints which will lead to more accurate results of the analysis. Experiments using newly created analyser on a set of benchmarks with known atomicity violations showed that analysis with parameters can reduce the results by dozens of reports that unnecessarily burdened developers and made it harder to reveal real errors.
|
|
|
Nonlinear models of DC machines
Král, Michal ; Mišinger, Lukáš (referee) ; Mach, Martin (advisor)
This bachelor thesis deals with modeling and simulation of DC motors. Four models of DC motors were created, according to four types of excitation ( derivative, serial, compound and separated). These models were designed in simulation program MATLAB & Simulink. Models were adjusted in order to respect magnetic non-linearity. Parameters for simulations were measured on real DC machine and the simulations were executed. This theses focuses on examination of temporary effects and comparing with real measured developments.
|
|
|
The design and manufacturing process of an injection mold
Stančík, Jan ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
Bachelor thesis deals with the topic of plastics injection. Firstly, it deals with the design process of the injection mold, which starts with the design of the injection molding product, with the design of the gating system and depending on the suitable forming of the core and cavity and suitable placement of the ejecting elements. After designing the injection mold design, the work is focused on the TPV documentation for the selected part of the mold assembly. Here are solved technological parameters and machining operations, assignment of machines and tools. In the last part of the thesis, an injection machine is selected depending on the calculations. Finally, an economic assessment is made on injection molding and discussion.
|
|
|
Laser application in wood working
Dušek, Přemysl ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This diplom thesis addresses the fundamental analysis of the general use of laser technology. Maintanence parameteres in laser wood cutting. Design wooden kit, cutting wooden kit and make kit prototyp. Last part of diploma thesys deals with technical and economic evaluation and comparison laser technology versus CNC machine. In diplom thesis is created procedure for glue kit.
|
|
|
Parameters of the laser beam
Hort, Zbyněk ; Kolář, Ladislav (referee) ; Osička, Karel (advisor)
The diploma thesis consists of the three main parts. The first part deals with the theoretical description of the laser technology and other unconventional technologies. In the second part, the thesis is focused on testing the parameters of the laser and evaluating the most suitable parameters. In the last part the diploma thesis deals with comparison of unconventional technologies in terms of cut quality
|
|
|
Optimization and parameter measurement of PON network FTTX
Černý, Michal ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
Práce rozebírá současný vývoj na poli pasivních optických sítí a jednotlivé generace přenosových standardů. Podrobněji se zabývá parametry ODN, metodami jejich měření a volbou potřebných měření v praxi. Hlavní část práce je zaměřena na měření pasivního WDM prvku, kde je provedena analýza vstupů a výstupů, měření vložného útlumu a přelechů podle ORL na provozních vlnových délkách.
|
|
|
Simulation of electric machines
Klíma, Jiří ; Mišinger, Lukáš (referee) ; Mach, Martin (advisor)
This thesis deals with modeling and simulations of DC and AC machines. They were created by four mathematical models. Three models of DC motors with different type of excitation (compound, serial, derivative) and one model for asynchronous motor. All models were implemented in MATLAB & Simulink. After measuring and setting the basic parameters of the machines, simulations were running. Simulation results are then compared with measured waveforms.
|
|
| |
guest ::
